Microplex M204 Bedienungsanleitung PDF herunterladen (Seite 2)

05/13/97 2

M202/M212 v5.6.3 Release Notes (Con’t)

To use IPAssign to recognize an M202/M212 on your network, you will

need to:

1 Insert the Microplex diskette labeled “IPAssign” into the ﬂoppy drive

on your Windows station. If you got IPAssign from Microplex’s FTP

or Web site, you can jump to Step 3.

2 Load the File Manager or WinFile and look under the ﬂoppy drive for

an IPAssign self-extracting ﬁle.

3 Double click on the IPAssign ﬁle to launch the install program.

4 When prompted to install, click on YES to load the InstallShield

Wizard.

5 Answer the prompts throughout the wizard.

6 Once the install process is complete, you will be prompted to view the

“ReadMe” ﬁle. Select “Yes” to read this and when done, close the

ﬁle.

7 Find the new IPAssign program group and double click on the “IPAs-

sign” icon to load the program.

8 At the “IPAssign” main dialogue box that appears, you should see an

entry for your M202/M212 appear in the list box. If not, give IPAs-

sign a couple of minutes to ﬁnd the device on the network or repower

the device to speed the process. Figure 1 shows an example screen.

Figure 1: IPAssign Main Screen

9 Once your M202/M212’s Ethernet address appears in the list box,

select it and press ASSIGN.

10 At the “Assign IP” dialogue box that displays next, ﬁll in the IP

address and subnet mask for this print server.

Note: You can also assign a default router/gateway entry

within this dialogue box allowing your M202/

M212 to communicate across subnets. This is

optional though.

1 2 3 4 5 6 7 8

Keine Kommentare

Microplex M204 Bedienungsanleitung Seite 2