Microplex M204 Spezifikationen PDF herunterladen (Seite 100)

92 USING THE M204’S COMMAND SET: npsh Command Set

set com1|com2

arguments

Conﬁgure serial I/O port parameters. arguments generally have the same syn-

tax and meaning as UNIX stty command options. Use the optional “-” where

indicated to reverse the command. The possible arguments are:

[-]parenb Enable [disable] parity generation and detection.

[-]parodd Select odd [even] parity.

[-]rtsﬂow Set RTS low when the M204 is not ready to accept data. With

“-”, RTS output is constantly high, and the M204 does not

use the RTS line to control input ﬂow.

[-]ctsﬂow Observe [ignore] CTS input and don’t transmit data if it is

low.

cs5|cs6|cs7|cs8 Select character size (ﬁve to eight bits).

50|110|134|300|600|1200|2400|4800|9600|19200|38400

Set terminal baud rate to the selected value.

[-]cstopb Use two [one] stop bits per character.

[-]istrip Strip input characters to seven bits. With “-”, do not strip.

[-]ixon Enable [disable] START/STOP output ﬂow control.

[-]ixoff Ask the system to send [not send] START/STOP characters

when the input queue is nearly empty/full.

[-]ixany Allow any character to restart output. With “-”, only restart

with a START character.

[-]parity Enable parenb, disable parodd, and set cs7 (seven-bit char-

acter size). With “-”, disable parenb, and set cs8 (eight-bit

character size).

[-]ignbrk Enable [disable] break detection to prevent error messages.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 203 204

Keine Kommentare

Microplex M204 Spezifikationen Seite 100