Microplex M204 Spezifikationen PDF herunterladen (Seite 45)

CONFIGURING THE M204 FOR TCP/IP: Host Configuration 37

tion of the commands necessary to create these entries:

hp:\

:sh:pw#80:mx#0\

:lp=/dev/spike.com2:\

:sd=/usr/spool/lpd/spike/com2:\

:lf=/usr/spool/lpd/spike/com2/log:\

:af=/usr/spool/lpd/spike/com2/acct:\

:if=/usr/spool/lpd/spike/com2/npr.if:

where hp is the printer name sending jobs to the M204 named spike through the inter-

face ﬁle npr.if.

To create these entries, please do the following:

1 Create the printer’s spooling directory and associated ﬁles.

cd /usr/spool/lpd

mkdir spike

mkdir spike/com2

touch spike/com2/log spike/com2/acct

chown -R daemon.daemon spike

chmod -R g+rwX,o+rX spike

2 Copy the nprbsd.if ﬁle from the host software medium to the spooling directory.

Copy the ﬁle as npr.if or name it something more meaningful.

cp nprbsd.if /usr/spool/lpd/spike/com2/npr.if

cd /usr/spool/lpd/spike/com2

chown daemon.daemon npr.if

chmod g+rwX,o+rX npr.if

3 Edit the npr.if variables to suit your system environment. Look for the comment

section beginning with “EDIT THESE VARIABLES” and at the end of this large

comment block, you will ﬁnd these:

When deﬁning these variables, remember that each is case sensitive. Please deﬁne

them as seen in these descriptions. In addition, a further description of these vari-

ables is included in the large comment block before them.

NPDIR_PATH (mandatory) Deﬁne the directory location of chr, banner,

onlcr, a2ps, and npscramble binaries. Usually

/usr/local/bin.

These binaries must be copied over from the host software medium. Please see

Examp

Note

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 203 204

Keine Kommentare

Microplex M204 Spezifikationen Seite 45