Microplex M204 Spezifikationen PDF herunterladen (Seite 159)

TROUBLESHOOTING THE M204: Novell Problems 149

somewhere in the print path.

Any printing from PCs should have a “raw” setup.

Some other things to consider when garbled data persists are:

• tab expansion (xtab) set on with graphic jobs,

• cable used between the M204 and the printer,

• type of ﬂow control being used on the M204 and a serial printer.

If you cannot eliminate the garbling, you may want to try printing without the Print

Server to see if the problem persists.

Novell Problems

Communication Related

No connection is made with the M204 after you have completed the print

setup

Whether you have conﬁgured the Print Server as a PSERVER or as an RPRINTER,

there are several things to conﬁrm:

• Have you tried repowering the M204? Wait about a minute before checking to see

if it has logged in and attached to a queue.

• Is the network connector fastened tightly to the unit?

• When going through the setup steps, did you name the M204 M_xxxxxx where

xxxxxx equals the last six digits of the Ethernet address? This is the default format

of the unit’s name whether it is acting as a PSERVER or as an RPRINTER.

This M_xxxxxx name must have six digits after the “_” so if necessary, pad out each

byte with a zero (0).

• Has the M204’s name been changed from its default of M_xxxxxx and if so, have

you incorporated this new name into your setup?

• When setting the M204 up as a PSERVER, did you specify a destination on the

M204 (e.g. d1prn1) for the printer name and did you remember this name is case

sensitive?

1 2 ... 154 155 156 157 158 159 160 161 162 163 164 ... 203 204

Keine Kommentare

Microplex M204 Spezifikationen Seite 159