Microplex M204 Spezifikationen PDF herunterladen (Seite 109)

USING THE M204’S COMMAND SET: npsh Command Set 101

set prn1|prn2 xtab <

INT

>|none

Sets the tabstop width. INT is an integer within the range 1 to 16.

set prn1 fastmode -ackmode

sets PRN1 to high performance mode and to not use the ACK handshake sig-

nal.

See also: list prn1|prn2 on page 87.

set rprinter

set rprinter add

pservername printernumber destname

Initiate a connection to a Novell PSERVER so that the M204 can act as a

remote printer. A non-M204 PSERVER must be pre-conﬁgured to recognize a

remote printer.

pservername Name of the PSERVER to connect to.

printernumber Number of the printer as deﬁned in the PSERVER display.

destname Destination name on the M204.

set rprinter del

pservername printernumber

Disable a remote printer connection.

See also: Host Configuration on page 53 and list rprinter on page 88.

set sysinfo

set sysinfo contact [

contactstring

]

Set a person to contact in case of system trouble. If contactstring is not

included in the syntax, the ﬁeld is emptied.

set sysinfo descramblekey

key

Set the key value used for descrambling print jobs from TCP/IP hosts. This

key is a four digit hexadecimal value obtained from the host software,

npscramble. Within the npscramble.c source code, there is a variable called

SR_KEY which contains the default key value. This can be changed to any

Examp

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 203 204

Keine Kommentare

Microplex M204 Spezifikationen Seite 109