Microplex M204 Spezifikationen PDF herunterladen (Seite 36)

28 CONFIGURING THE M204 FOR TCP/IP: M204 Configuration

Manual Conﬁguration Through the COM Port

A terminal, PC, or laptop can be connected to one of the M204’s COM ports for con-

ﬁguration purposes. A straight-through serial cable is normally needed unless a PC is

attached; in this case, a null modem cable can be used. Please see Flow Control

Methods on page 169 for more details.

To conﬁgure the M204 through the serial ports, you need to:

1 Conﬁgure your terminal settings according to the following speciﬁcations, unless

the COM port’s parameters have been modiﬁed on the Print Server:

Baud rate: 9600 Data bits: 8

Stop bits: 1 Parity: NONE

Receive handshake: XON/XOFF Transmit handshake: XON/XOFF

2 Turn on the M204 power. Wait until the STAT LED ﬂashes regularly and then

press the <Break> key on your terminal once.

If you see garbage characters on the screen, check the baud rate and parity settings

of the terminal. If you aren’t getting anything, it may be your cable.

3 Press <Enter> for the local host (i.e. the M204) when the prompt appears asking

for an Internet address to login to.

4 Login as root when asked for a login name.

5 Press <Enter> at the password prompt. No password is required at this point, as

the M204 is still unconﬁgured.

M204:\

:sm=

netmask

:hd=/usr/boot:\

:bf=null:\

:gw=

default router

:ht=ethernet:\ (or “tr:\” for Token Ring)

:ha=

network address

:\ (e.g. 0080720000DC)

:ip=

ipaddress

:ts=

time server

:to=

timezone

: (in seconds from GMT)

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 203 204

Keine Kommentare

Microplex M204 Spezifikationen Seite 36