Microplex M204 Spezifikationen PDF herunterladen (Seite 80)

72 CONFIGURING THE M204 FOR WINDOWS: Host Configuration

Through the COM Port on page 28 for detailed instructions.

Once you have conﬁgured the unit, you will notice the STAT LED ﬂashing on once

per second. This means the M204 is conﬁgured and recognizable on the network. At

this point, you can now conﬁgure your host.

Host Conﬁguration

Now that your workstation(s) and the M204 have IP addresses and netmasks, you can

now conﬁgure a print setup. There are several methods available depending on what

Windows package you are using. If you experience Windows-related printing prob-

lems after completing these setups, please see TROUBLESHOOTING THE M204 on

page 145 for more information.

Windows NT Version 3.5x

LPR Method

1 Create a print path and printer; select Main.

2 Select Control Panel.

3 Select Printers which loads up the Print Manager.

4 Select Create a Printer from the Printer menu.

5 Deﬁne the printer name and driver; in the Print to ﬁeld, select Other....

6 Choose LPR port from the list that comes up and select OK.

7 Fill in the host name or IP address of the M204.

8 Fill in the destination or queue on the M204 (e.g. d1prn1) and select OK.

where:

destination Is a pre-deﬁned destination or queue on the M204 that is automat-

ically mapped by default to an I/O port. For example, destination

d1prn1 is automatically mapped to the PRN1 port. Please see

Destinations on page 77 for a more detailed description. Please

note that destinations are case sensitive and are lowercase by

default.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 203 204

Keine Kommentare

Microplex M204 Spezifikationen Seite 80