Microplex M204 Spezifikationen PDF herunterladen (Seite 33)

CONFIGURING THE M204 FOR TCP/IP: M204 Configuration 25

Manual Conﬁguration Through the Network with ARP

To manually conﬁgure the M204 using the network, go to a host terminal and do the

following:

1 Log on to your system as root user.

2 Assign an IP address and IP name to the M204 in your host table (/etc/hosts,

hosts nis map, or DNS name tables).

3 Find the hardware address for the M204 PCMCIA slot you are using. It must be

entered as part of this procedure.

Each PCMCIA slot has an associated Ethernet and Token Ring address.

4 Use the arp command to add an entry in the host's arp able. This is the most com-

mon syntax for this command:

arp -s

ipname hardwareaddress

where ipname is the M204’s IP name or IP address and hardwareaddress is that

of the M204’s PCMCIA slot.

If this syntax doesn’t apply, look in your host’s reference manual to ﬁnd the

proper syntax for the arp command.

5 telnet to the M204. This will bring up a login screen.

telnet

ipname

6 Log into the Print Server as root.

7 At the password prompt, press <Enter>. No password is required at this point as

the M204 is still unconﬁgured.

This WARNING message is normal at this point so you can ignore it:

STORED AND CURRENT VALUES DIFFER

You should now see a prompt displayed that has the M204 IP address followed by

a colon, then root.

ipaddress

:root>

8 Store the new IP address and netmask in EEPROM so that the M204 can remem-

Syntax

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 203 204

Keine Kommentare

Microplex M204 Spezifikationen Seite 33