Microplex M204 Spezifikationen PDF herunterladen (Seite 31)

CONFIGURING THE M204 FOR TCP/IP: M204 Configuration 23

M204 Conﬁguration

When the M204 is ﬁrst installed on a TCP/IP network, you are unable to communicate

with it since its network parameters are not initialized. During conﬁguration, the fol-

lowing parameters are initialized and saved in EEPROM:

• IP address (mandatory),

• netmask or sub-netmask(mandatory),

• root user password (recommended for security),

• guest user password (recommended for security).

Initializing these parameters permits conﬁguration of all remaining settings through

any of these ﬁve ways:

1 computer-aided conﬁguration with ezsetup or npconﬁg,

2 manual conﬁguration through the network with ARP,

3 manual conﬁguration through the network with RARP,

4 manual conﬁguration through the network with BOOTP,

5 manual conﬁguration with a terminal connected to COM1.

Once you have completed any one of these methods, you will notice the STAT LED

ﬂashing on once per second. This means the M204 is conﬁgured and recognizable on

the network. At this point, you can then conﬁgure a host for printing by continuing

with Host Configuration on page 30. This will complete your entire print setup unless

you want to enhance it.

If you want to continue with any of the following procedures, please ﬁnd them as indi-

cated in other sections of this manual:

• Add to or change conﬁguration of your M204. Please see USING THE M204’S

COMMAND SET on page 81.

• Utilize more advanced features of the Print Server. Please see USING THE

M204’S ADDITIONAL OPTIONS on page 119.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 203 204

Keine Kommentare

Microplex M204 Spezifikationen Seite 31