Microplex M204 Spezifikationen PDF herunterladen (Seite 115)

USING THE M204’S COMMAND SET: npsh Command Set 107

interface between the data link protocol layer (i.e. Ethernet or

Token Ring) and higher network protocol layers. Each NIT is

indexed by an interface number (ifnum).

papname Printer Access Protocol (PAP) name. An AppleTalk name for

each printer deﬁned on the host. Makes up the second half of

the name listed in the Chooser and is transparently mapped to

an M204 destination. There can be a maximum of four print-

ers which can point to any one of eight destinations on the

M204.

store ifc

ifnum

tr frame 1.5k|2k|4k

Store the Token Ring card’s packet frame size properties. The card can use

frame sizes of either 1500 (1.5k), 2052 (2k), or 4472 (4k) bytes with the

default being 2052 bytes.

store ifc

ifnum

tr speed 4m|16m

Store the Token Ring card’s speed properties. The card can operate at either 4

Mbps (4m) or 16 Mbps (16m) with 16 Mbps being the default speed.

store ifc

ifnum

utp [[-]li] [[-]rx]

Modify the NIT module’s physical properties where li enables link integrity

and rx enables the increased receive threshold. A “-” before either disables

this feature.

ifnum is the Interface Number labelled on each of the M204’s PCMCIA slots.

See also: list ifc on page 86 and Manipulating the M204’s UTP Interface on

page 120.

store pserver

store pserver name

newservername

Store a new name for the M204 indicated by newservername. This name will

affect Novell, AppleTalk, and NetBIOS setups.

Note

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 203 204

Keine Kommentare

Microplex M204 Spezifikationen Seite 115