Microplex M204 Spezifikationen PDF herunterladen (Seite 26)

18 INSTALLING THE M204 ON THE NETWORK: Connecting Peripherals

• autofeed for printers (usually non-laser printers) that require the AUTOFD line to

be asserted,

• bbmode for simulating an attached printer,

• fastmode for high performance parallel interfaces that can handle an increased

transfer rate,

• slowmode for slower parallel interfaces which require slower transfer rates.

For more information, please see list prn1|prn2 on page 87, set prn1|prn2 on page 99,

and PRN1/PRN2 Pinout on page 167.

Serial Port Connections (COM1, COM2)

Two 9-pin male DE-9P connectors with IBM PC AT compatible pinouts are provided

for connection to printers using serial ports. Each of these ports have various parame-

ters which control such things as:

• parity selection, generation, and detection,

• hardware ﬂow control,

• software ﬂow control,

• character description.

For more information, please see list com1|com2 on page 85, set com1|com2 on page

92, and 9-Pin COM1/COM2 Pinout on page 168.

For best performance, connect RXD lines (Pin 2) to ground on cables connected to

equipment that do not drive the transmit data signal (i.e. some printers). This will pre-

vent induced noise from being processed as data.

You have now completed the basic installation of the Print Server onto the network

and now it must be conﬁgured for use. Please continue with the appropriate chapter

for your printing environment to learn how to print to the M204:

• CONFIGURING THE M204 FOR TCP/IP on page 19,

• CONFIGURING THE M204 FOR NOVELL on page 51,

• CONFIGURING THE M204 FOR APPLETALK on page 63,

• CONFIGURING THE M204 FOR WINDOWS on page 67.

Note

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 203 204

Keine Kommentare

Microplex M204 Spezifikationen Seite 26