Microplex M204 Spezifikationen PDF herunterladen (Seite 101)

USING THE M204’S COMMAND SET: npsh Command Set 93

[-]igndcd Disable this feature if you are using a modem connected to

the COM port to establish terminal sessions.

[-]onlcr Enable [disable] carriage return insertion.

[-]opost Allow output processing such as onlcr, xtab, and descram-

bling. With “-”, do not allow any of this processing.

[-]slip Sets the speciﬁed serial port as a dedicated SLIP connection.

This command will fail if the serial port is already conﬁgured

as a print destination. Users must reconﬁgure the M204’s

destinations so that none of the destinations are mapped to

the serial port that you want to use as a dedicated SLIP con-

nection.

ﬂush Flush the data in the serial I/O port input and output buffers.

unlock Release the access lock on the serial I/O port.

Caution

When an I/O port is active, unlock can cause output from two jobs to mix.

set com1|com2 timeout <

INT

Terminate the print job sent to the I/O port if it is not printed after the timeout

period (INT is time in minutes in the range of 0 to 255). If the timeout is set to

zero (0), the timeout feature is disabled.

Printer errors will cause the M204 to postpone printing until the printer is

ﬁxed regardless of this timeout feature being set or not. Therefore, no data

will be lost.

set com1|com2 xtab <

INT

>|none

Sets the tabstop width. INT is an integer within the range 1 to 1

Note

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 203 204

Keine Kommentare

Microplex M204 Spezifikationen Seite 101