Microplex M204 Spezifikationen PDF herunterladen (Seite 133)

USING THE M204’S ADDITIONAL OPTIONS: TCP/IP Options 125

3 Power up the unit in its default state and conﬁgure as desired.

4 After conﬁguring the Print Server, be sure to return the jumper strap to EEPROM

Enable and repower the unit.

Through npsh

To restore the network default settings through the M204’s command set:

1 Use a Telnet session or connect a terminal to a COM port of the Print Server.

2 Once logged in as a root user, restore factory defaults by entering:

store tcpip from default

3 Reboot the M204 and reconﬁgure its settings according to one of the methods dis-

cussed in M204 Configuration on page 23.

Figure 4: M204 Jumper Settings

Getting Ready for Complex Networks

The default settings on the Print Server allow printing in a simple network without

routers. You need to add routing information to communicate or print from hosts on

other networks.

To do this, you can establish either of the following:

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 203 204

Keine Kommentare

Microplex M204 Spezifikationen Seite 133