Microplex M204 Spezifikationen PDF herunterladen (Seite 23)

INSTALLING THE M204 ON THE NETWORK: Overview 15

INSTALLING THE M204 ON THE NETWORK

Overview

The ﬁrst step of your M204 setup is to attach it to the network. This section tells you

how to do that and also covers the Print Server’s network interfaces.

Preparing for Installation

Before unpacking and installing the hardware, read the FCC Warning.

CE Mark Conformity Declaration

The Microplex M204 Print Server fulﬁls the requirements for radiated emission

according to limit B of EN55022/1987 and the requirements for immunity according

to EN50082-1/1992 residential, commercial, and light industry. Compliance is not

valid for unshielded network and printer cables. Also, the included plastic caps must

be place over any unused I/O port.

Unpacking the M204

Before unpacking the M204 Print Server, check the package for any obvious damage

FCC Warning

This equipment generates, uses and can radiate radio frequency energy.

If it is not installed and used as directed in this manual, interference to

radio communications may result. The equipment has been tested and

found to comply with the limits for a Class A computing device

pursuant to Subpart B of Part 15 of FCC rules, which are designed to

provide reasonable protection against such interference when operated

in a commercial environment. Operation of this equipment in a

residential area is likely to cause interference. In such a case the user

will be required to correct the interference at the expense of the user.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 203 204

Keine Kommentare

Microplex M204 Spezifikationen Seite 23